This test method is an established analytical method for measuring the combined concentration of nitrate (NO₃-) and nitrite (NO₂-) nitrogen in water and wastewater samples. It is part of the Standard Methods for the Examination of Water and Wastewater.
This test method is a colorimetric test procedure used for the determination of nitrite-nitrogen (NO₂-N) in water samples. It is commonly applied in environmental monitoring, wastewater treatment, and drinking water analysis.
This test method is a standardized analytical procedure for the quantitative determination of metals in water samples using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The method is widely employed for monitoring metal contaminants in drinking water, surface water, groundwater, and wastewater. This test method quantifies soluble aluminum, antimony, barium, beryllium, boron, cadmium, chromium, cobalt,… Continue reading Metals ICPOES [Soluble]
This test method is a standardized analytical procedure for the quantitative determination of metals in water samples using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The method is widely employed for monitoring metal contaminants in drinking water, surface water, groundwater, and wastewater. This test method quantifies aluminum, antimony, barium, beryllium, boron, cadmium, cobalt, copper, iron,… Continue reading Metals ICPOES [Water]
This test method is an official U.S. Environmental Protection Agency (EPA) procedure for the determination of metals and trace elements in a variety of water and waste samples using Inductively Coupled Plasma–Optical Emission Spectrometry (ICP-OES). This test method quantifies soluble calcium, copper, iron, magnesium, manganese, phosphorus, potassium, sodium, sulfur, and zinc.
This test method is a widely used procedure for the quantitative analysis of metals in sludge, soils, sediments, and other solid matrices using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). The method is designed to accurately measure metals present in complex environmental samples, including wastewater treatment sludge. This test method quantifies aluminum, antimony, arsenic, barium,… Continue reading Metals ICPOES [Sludge]
This test method is a standardized procedure for the determination of multiple minerals in environmental samples, including sludge, soils, sediments, and solid wastes, using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). This test method quantifies calcium, copper, iron, magnesium, manganese, phosphorus, phosphorus (as P2O5), potassium, potassium (as K2O), sodium, sulfur, and zinc.
This test method is a widely used analytical procedure for the quantitative determination of trace metals and elements in various water and wastewater samples using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). This method is recognized for its high sensitivity and precision, allowing for the detection of metals at ultra-trace levels. This test method quantifies antimony,… Continue reading Metals ICPMS [WW KED mode] all except Al, B
This test method is a widely used analytical procedure for the quantitative determination of trace metals and elements in various water and wastewater samples using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). This method is recognized for its high sensitivity and precision, allowing for the detection of metals at ultra-trace levels. This test method quantifies aluminum… Continue reading Metals ICPMS [WW Stnd Mode] Al, B
This test method is a standard method from Standard Methods for the Examination of Water and Wastewater used for the determination of lithium in water samples by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES).